Medeco Lock Installation & Rekey in New York: What to Know First
We provide independent Medeco lock installation and rekey service across New York City, typically completing residential jobs same-day and most rekeys within the hour. As an independent Medeco service provider, we stock genuine Medeco cylinders, key-in-knob sets, and deadbolt hardware for the lines most common in New York homes and co-ops. Flat price before the truck rolls - that is the only way we know how to do it. Call (833) 317-5852 for a direct quote; you’ll speak to a live person, 24/7, and the price we give is the price on the invoice.
This page is for homeowners in Manhattan pre-war buildings, Brooklyn brownstones, and Queens garden apartments who already have Medeco hardware and need it serviced, rekeyed, or upgraded without the runaround.
How Medeco Products Fail - and How We Fix Them
- Medeco Original deadbolts with sticky key rotation. In New York’s humidity swings, the Original’s sidebar chamber collects fine grit from decades of Manhattan particulate and Brooklyn brownstone dust. The key turns hard, then not at all. We disassemble the cylinder, ultrasonic-clean the sidebar and chambers, relubricate with Medeco-specified dry film lubricant, and re-pin if the wear is uneven. Full replacement only if the sidebar slots are wallowed out.
- Medeco Biaxial cylinders with sheared bottom pins. The Biaxial’s angled cuts concentrate torque on the pin tips during heavy use, especially in commercial entry doors in Midtown and the Financial District. When a bottom pin shears, the key works intermittently or traps in the cylinder. We extract the fragment, inspect the plug for scoring, and install OEM replacement pins - never generic equivalents, which lack the precise angle tolerance.
- Medeco M3 key control erosion. The M3’s slider system depends on tight tolerances that loosen after 15+ years of Queens salt-air exposure or overheated Upper West Side radiator corridors. Keys start to work in neighboring units, or the slider hangs. We rekey to a fresh bitting, replace worn sliders with factory parts, and verify against the original key code card if the owner has it.
- Medeco X4 residential deadbolts with latch misalignment. Common in post-war Bronx and Staten Island frame construction where seasonal settling shifts door frames. The X4’s solid brass bolt meets the strike plate off-center, forcing the mechanism and wearing the cam. We re-align the strike, shim the hinges if needed, and rekey the cylinder while we’re at it - two problems solved in one visit.
- Medeco Logic electronic cylinders with intermittent read failures. The Logic’s battery compartment and capacitive contacts corrode faster in New York’s steam-heated buildings where winter indoor humidity drops to 15%. The key authenticates, then doesn’t. We clean the contact array, replace with lithium primary cells (alkaline leaks kill these units), and rekey the mechanical override cylinder so you’re never locked out if the electronics fail entirely.
Our Medeco Lock Installation & Rekey Process
- 1
You call, we answer. A live person at Strongbox Lock & Safe Co. of New York takes your call 24/7. We ask which Medeco line you have, what’s happening, and where in the city you are.
- 2
Flat quote on the phone. Based on the model and symptom, we quote a real price before dispatching. No ol9 bait, no surprises. Seniors and veterans receive 5% off automatically.
- 3
Background-checked technician, ID at the door. Our tech arrives in uniform, presents ID, and confirms the quoted price before touching anything.
- 4
Diagnosis and parts decision. We inspect your Medeco hardware on-site. If the cylinder is salvageable, we rekey with OEM pins. If the housing is cracked or the sidebar chamber is worn beyond spec, we quote replacement with genuine Medeco or discuss quality alternatives from Schlage or Kwikset if Medeco key control is no longer needed.
- 5
The work and the test. Rekey or install, then 20+ cycles with your new keys, tested from both sides, in both hot and cold conditions if accessible.
- 6
Written guarantee, clean site. You get the 90-Day Done Right Promise in writing. We sweep up. You pay what we quoted. Done.
What Medeco Lock Installation & Rekey Costs in New York
These are real ranges for Medeco work we do weekly across New York’s five boroughs:
- Medeco residential rekey (single cylinder): $145-$195
- Medeco rekey with extraction (broken key, stuck pin): $195-$275
- Medeco deadbolt installation (customer-supplied hardware): $165-$225
- Medeco deadbolt installation with new cylinder: $340-$485
- Medeco M3/Biaxial high-security rekey (key code card required): $225-$295
- Medeco Logic electronic cylinder service: $275-$395
Price moves with: door prep condition (solid core vs. metal door with no existing bore), after-hours or holiday timing, and whether we need to source a discontinued cylinder from our secondary supplier in Long Island City. We apply our $50 off any repair over $250 automatically when eligible. Call (833) 317-5852 for your exact quote - estimates are free.
Why New York Homeowners Call Strongbox Lock & Safe Co. of New York for Medeco Work
We’ve been serving New York for over 42 years. Vincent Calabrese learned this trade in Brooklyn and still runs jobs the way his father ran buildings on 43rd Street in Sunset Park: show up when you say, do what you promised, and stand behind it.
Our technicians carry Medeco, Schlage, Kwikset, and the full premium catalog - so we match the right hardware to your actual security need, not just what’s on the van. The 90-Day Done Right Promise means if your Medeco rekey doesn’t feel right, we come back. No paperwork to file, no argument. A square deal: the price we quote is the price you pay.
FAQs
Does rekeying my Medeco void the manufacturer warranty?
No, rekeying performed by a qualified locksmith using OEM parts does not void Medeco’s limited mechanical warranty. We use factory pins and maintain key code documentation so your warranty stays intact. If your lock is under 10 years old, we’ll note the service date for your records. Call (833) 317-5852 if you need warranty guidance.
Can you rekey Medeco hardware the same day in New York?
Yes, for all current Medeco lines and most discontinued series. We stock Original, Biaxial, M3, and X4 cylinders and pin kits at our Brooklyn depot. For obsolete Medeco KeyMark or early Logic units, we may need one business day to source from our Long Island City supplier. Call (833) 317-5852 and we’ll confirm parts before dispatching.
Is it cheaper to repair my old Medeco or replace it with new hardware?
If the cylinder housing and bolt mechanism are sound, rekeying at $145-$195 is almost always the better value. Replacement makes sense when the sidebar chamber is worn, the faceplate is cracked, or you want to upgrade from Original to M3 key control. We’ll show you both options on-site and quote each flat. Call (833) 317-5852 for a free assessment.
Do you use genuine Medeco parts or aftermarket equivalents?
We use OEM Medeco pins, sliders, and cylinders for all rekey and repair work. For discontinued lines where factory parts are unavailable, we source quality aftermarket from Medeco-compatible manufacturers and tell you before installation. We never substitute without your okay. Call (833) 317-5852 to discuss parts for your specific model.
How do I know my Medeco is really a Medeco and not a knockoff?
Authentic Medeco cylinders have “MEDECO” stamped on the plug face and a small arrow marking the keyway position. Counterfeits often miss the arrow or use softer brass that dents easily. If you’re unsure, our technician verifies authenticity on arrival - we’ve seen convincing fakes in Flushing and the East Village. Call (833) 317-5852 and we’ll sort it out.
Written by Vincent Calabrese, Owner, Strongbox Lock & Safe Co. of New York at Strongbox Lock & Safe Co. of New York, serving New York and nearby areas.